Carman haas has high end 2D laser scanning galvanometer, 3D laser scanning galvanometer, high power laser welding galvanometer, beauty galvanometer and laser cleaning solution.Suitable for lase marking, microscope, drilling, trimming and cutting etc.It is widely used marking on metal,part of the non-metallic plating materials,plastic rubber,industrial-used plastics,ceramics and other marking. Deep carved,fine processing,special material processing.
Carman haas 2-axis Galvanometer Scanner Head including High Speed (A Series) and Standard Series, are designed for a board range of application including laser precision marking, laser cutting, laser welding, rapid prototyping, 3D printing, drilling location, laser cleaning, medical beauty and so on.Embedded control system guaranteed the servo loop operation. It is compact,stable and cost-efficiency.
1. Aperture: 10mm, 12mm；
2. Good degree of Linearity, high resolution small drift, precise repetitive positioning；
3. Highest processing speeds in the industry to maximize production throughput；
4. High-accuracy & high-stability models available for precise scanning applications；
5. Wide range of cost-efficient, high-performance options for specific applications;
6. Easy to install.
|
Model |
ZB2D-10A |
ZB2D-12A |
ZB2D-10C |
ZB2D-12C |
|
Aperture (mm) |
10 |
12 |
10 |
12 |
|
Typical scan angle |
±0.35 rad |
±0.35 rad |
±0.35 rad |
±0.35 rad |
|
Nonlinearity |
<0.5 mrad |
<0.5 mrad |
<0.8 mrad |
<2 mrad |
|
Tracking error |
0.15ms |
0.18ms |
0.2ms |
<0.2ms |
|
Step Response Time |
0.3ms |
<0.35ms |
0.4ms |
<0.4ms |
|
RepeatabiIity(RMS) |
<2 urad |
<2 urad |
<2 urad |
<2 urad |
|
Gain drift |
<50 ppm/K |
<50 ppm/K |
<80 ppm/K |
<80 ppm/K |
|
Zero drift |
<30 urad/K |
<30 urad/K |
<30 urad/K |
<30 urad/K |
|
Long-term drift over 8hours（After 30 min warn-up） |
<0.1 mrad |
<0.1 mrad |
<0.2 mrad |
<0.2 mrad |
|
Marking speed |
<2.5m/s |
<2m/s |
<2m/s |
<2m/s |
|
Positioning speed |
<15m/s |
<10m/s |
<10m/s |
<10m/s |
|
Power requirements |
±15V/3A |
±15V/3A |
±15V/3A |
±15V/3A |
|
Digital Signal |
XY2-100 |
XY2-100 |
XY2-100 |
XY2-100 |
|
Reflection wavelength |
1064nm |
1064nm |
1064nm |
1064nm |
|
Working temperature |
-15℃ to 55℃ |
-15℃ to 55℃ |
-15℃ to 55℃ |
-15℃ to 55℃ |
|
Stock temperature |
-10℃ to 60℃ |
-10℃ to 60℃ |
-10℃ to 60℃ |
-10℃ to 60℃ |
|
Dimensions LWH(mm) |
114x96x94 |
116x99x97 |
114x96x94 |
116x99x97 |
Remarks:
(1) Refers to the temperature drift within 8 hours after starting half an hour to warm up;
(2) Refers to the marking speed under the condition of small characters (1mm) to obtain high-quality marking effect, and does not represent the maximum marking speed; according to different marking contents and marking effects, the maximum marking speed can be as large as the maximum positioning speed.
(3) Conventional wavelength bands, other wavelength bands need to be customized.
By ron gravatt from Nicaragua - 2017.09.16 13:44
By Sara from Ukraine - 2018.12.25 12:43
