Carman haas has high end 2D laser scanning galvanometer, 3D laser scanning galvanometer, high power laser welding galvanometer, beauty galvanometer and laser cleaning solution.In addition to competitive prices, it also has good performance.Suitable for lase marking, microscope, drilling, trimming and cutting etc.
Economic Series is widely used in laser marking, laser welding and other industries, mainly for low-end applications, and can meet 90% of the general marking requirements of the market. It is one of the most cost-effective laser scanning galvanometers in the industry.
(1) High stability
The design of this series adopts technologies such as multi-level anti-interference and high-reliability protection array circuits. In the selection of core components, all foreign first-line brands are used. All galvanometers have undergone 360 hours of long-term aging test before leaving the factory. , can operate stably and reliably for a long time under various extreme conditions
(2) high RepeatabiIity
It has high response performance, adapts to the ability of high-speed small character marking, and can also have a small turning delay and jump delay during high-speed marking.
(3) High precision
Keep improving in control and craftsmanship, with high repeatability positioning accuracy comparable to products of the same level in the United States and abroad.
(4) high linearity
The control adopts unique linear compensation technology and parallelogram correction technology, which has good linearity in the whole marking range.
|
Model |
ZB2D-10C |
ZB2D-16B |
ZB2D-20B |
ZB2D-30B |
|
Aperture (mm) |
10 |
16 |
20 |
30 |
|
Typical scan angle |
±0.35 rad |
±0.35 rad |
±0.35rad |
±0.35 rad |
|
Nonlinearity |
<0.5 mrad |
<0.5 mrad |
<0.8mrad |
<0.8mrad |
|
Tracking error |
0.15ms |
0.3ms |
0.5ms |
0.7ms |
|
Step Response Time |
0.3ms |
0.65ms |
— |
— |
|
RepeatabiIity(RMS) |
<2 urad |
<2urad |
<2urad |
<2urad |
|
Gain drift |
<50 ppm/K |
<80 ppm/K |
<80 ppm/K |
<80 ppm/K |
|
Zero drift |
<30 urad/K |
<30 urad/K |
<30 urad/K |
<30 urad/K |
|
Long-term drift over 8hours（After 30 min warn-up） |
<0.1 mrad |
<0.2mrad |
<0.2mrad |
<0.2mrad |
|
Marking speed |
<2.5m/s |
<1m/s |
<0.8m/s |
<0.5m/s |
|
Positioning speed |
<10m/s |
<7m/s |
<3m/s |
<2m/s |
|
Power requirements |
±15V/3A |
±15V/5A |
±15V/5A |
±15V/5A |
|
Digital Signal |
XY2-100 |
XY2-100 |
XY2-100 |
XY2-100 |
|
Reflection wavelength |
10.6um |
10.6um |
10.6um |
10.6um |
|
Working temperature |
-15℃ to 55℃ |
-15℃ to 55℃ |
-15℃ to 55℃ |
-15℃ to 55℃ |
|
Stock temperature |
-10℃ to 60℃ |
-10℃ to 60℃ |
-10℃ to 60℃ |
-10℃ to 60℃ |
|
Dimensions LWH(mm) |
114x96x94 |
158x132x140 |
158x132x140 |
195x150x171 |
Remark：
(1) Refers to the temperature drift within 8 hours after starting half an hour to warm up;
(2) Refers to the marking speed under the condition of small characters (1mm) to obtain high-quality marking effect, and does not represent the maximum marking speed; according to different marking contents and marking effects, the maximum marking speed can be as large as the maximum positioning speed.
(3) Conventional wavelength bands, other wavelength bands need to be customized.
By Rebecca from Korea - 2018.06.12 16:22
By Evelyn from Mexico - 2017.12.19 11:10
