SLA(Stereolithography) is an additive manufacturing process that works by focusing an UV laser on to a vat of photopolymer resin. With the help of computer aided manufacturing or computer aided design(CAM/CAD) software, the UV laser is used to draw a pre-programmed design or shape on to the surface of the photopolymer vat. Photopolymers are sensitive to ultraviolet light, so the resin is photochemically solidified and forms a single layer of the desired 3D object. This process is repeated for each layer of the design until the 3D object is complete.
CARMANHAAS could offer customer the optical system mainly includes fast Galvanometer Scanner and F-THETA scan lens, Beam expander, Mirror, etc.
355nm Galvo Scanner Head
|
Model |
PSH14-H |
PSH20-H |
PSH30-H |
|
Water cool/sealed scan head |
yes |
yes |
yes |
|
Aperture (mm) |
14 |
20 |
30 |
|
Effective Scan Angle |
±10° |
±10° |
±10° |
|
Tracking Error |
0.19 ms |
0.28ms |
0.45ms |
|
Step Response Time(1% of full scale) |
≤ 0.4 ms |
≤ 0.6 ms |
≤ 0.9 ms |
|
Typical Speed |
|||
|
Positioning / jump |
< 15 m/s |
< 12 m/s |
< 9 m/s |
|
Line scanning/raster scanning |
< 10 m/s |
< 7 m/s |
< 4 m/s |
|
Typical vector scanning |
< 4 m/s |
< 3 m/s |
< 2 m/s |
|
Good Writing quality |
700 cps |
450 cps |
260 cps |
|
High writing quality |
550 cps |
320 cps |
180 cps |
|
Precision |
|||
|
Linearity |
99.9% |
99.9% |
99.9% |
|
Resolution |
≤ 1 urad |
≤ 1 urad |
≤ 1 urad |
|
Repeatability |
≤ 2 urad |
≤ 2 urad |
≤ 2 urad |
|
Temperature Drift |
|||
|
Offset Drift |
≤ 3 urad/℃ |
≤ 3 urad/℃ |
≤ 3 urad/℃ |
|
Qver 8hours Long-Term Offset Drift （After 15min warn-up） |
≤ 30 urad |
≤ 30 urad |
≤ 30 urad |
|
Operating Temperature Range |
25℃±10℃ |
25℃±10℃ |
25℃±10℃ |
|
Signal Interface |
Analog: ±10V Digital: XY2-100 protocol |
Analog: ±10V Digital: XY2-100 protocol |
Analog: ±10V Digital: XY2-100 protocol |
|
Input Power Requirement (DC) |
±15V@ 4A Max RMS |
±15V@ 4A Max RMS |
±15V@ 4A Max RMS |
355nm F-Theta Lenses
|
Part Description |
Focal Length (mm) |
Scan Field (mm) |
Max Entrance Pupil (mm) |
Working Distance(mm) |
Mounting Thread |
|
SL-355-360-580 |
580 |
360×360 |
16 |
660 |
M85x1 |
|
SL-355-520-750 |
750 |
520×520 |
10 |
824.4 |
M85x1 |
|
SL-355-610-840-(15CA) |
840 |
610×610 |
15 |
910 |
M85x1 |
|
SL-355-800-1090-(18CA) |
1090 |
800×800 |
18 |
1193 |
M85x1 |
355nm Beam Expander
|
Part Description |
Expansion Ratio |
Input CA (mm) |
Output CA (mm) |
Housing Dia(mm) |
Housing Length(mm) |
Mounting Thread |
| BE3-355-D30:84.5-3x-A(M30*1-M43*0.5) |
3X |
10 |
33 |
46 |
84.5 |
M30*1-M43*0.5 |
| BE3-355-D33:84.5-5x-A(M30*1-M43*0.5) |
5X |
10 |
33 |
46 |
84.5 |
M30*1-M43*0.5 |
| BE3-355-D33:80.3-7x-A(M30*1-M43*0.5) |
7X |
10 |
33 |
46 |
80.3 |
M30*1-M43*0.5 |
| BE3-355-D30:90-8x-A(M30*1-M43*0.5) |
8X |
10 |
33 |
46 |
90.0 |
M30*1-M43*0.5 |
| BE3-355-D30:72-10x-A(M30*1-M43*0.5) |
10X |
10 |
33 |
46 |
72.0 |
M30*1-M43*0.5 |
355nm Mirror
|
Part Description |
Diameter(mm) |
Thickness(mm) |
Coating |
| 355 Mirror |
30 |
3 |
HR@355nm,45° AOI |
| 355 Mirror |
20 |
5 |
HR@355nm,45° AOI |
| 355 Mirror |
30 |
5 |
HR@355nm,45° AOI |
By Debby from Egypt - 2018.12.25 12:43
By Antonio from Berlin - 2017.08.16 13:39
